Tilbud
50210 ECos ESU. Centralstation.

50210 ECos ESU. Centralstation.

4.995,00 DKK 5.740,00 DKK

Vejl. udsalgspris 5.740,00 DKK

Model/Varenr.: 50210
Vægt: 2.995 kg.
Lagerstatus: Ikke på lager
stk.

ECoS 50210, er afløseren af den hidtil førende ECoS 50200, der med sine 6 ampære til sporet gør styreenheden til en af de mest kraftfulde på markedet, og dermed parrat til selv de største H0 anlæg, spor 0, G samt 1.

Med til ECoS 50210 medfølger en 150 Watt stor transformator, der kan justeres til at afgive et varieret output på mellem 15 og 21 Volt, alt efter den opgave den skal løse fra kørsel med spor N til det store Spor 1 havetog. ECoS går desuden ud med op til 4 Amp. på skinnerne, hvorved behov for brug af en booster, kun vil forekomme på meget store anlæg. 

ECoS kan administrere op til 16384 lokomotiver, med op til 9999 adresser med op til 128 køretrin i DCC og op til 255 adresser med op til 27 køretrin i Märklin Motorola. Alle lokomotiver kan individuelt, fremstå med eget billede samt programmeres, med selvforklarende piktogrammer for de forskellige funktioner. 

ECoS 50210 understøtter DCC, Märklin Motorola herunder lokomotiver med Mfx samt RailCom. 

Alle typer af sporskifter, tresporskifter samt krydsspor ligger klar i ECoS database, og kan på lige fod med signaler, styres via magnetdekoder eller den i signaler eller sporskifter indbyggede dekoder. 

ECos 50210 håndterer på til 1024 køreveje med op til 256 sporskifter og/eller signaler i hver kørevej. 

Den indbyggede sporplan med op til 99 sider, gør det let at overskue alle magnetartikler på banen, og inddele dem i f.eks. Hovedbanegård, skyggebanegårde, Sidebanegårde samt rangererområder og meget meget mere. Farver på skærmen gør det samtidig legende let at beskue situationen på anlægget. 

Det er muligt at lave op til 8 forskellige automatiske pendulstrækninger, hvor tilbagemeldningsmoduler af typen S88 søger for at alt foregår pr. automatik, således får du med ECos 50210 en blind køremakker" der kan skabe automatisk pendul kørsel på din bane. 

Med ECos 50210 kan du lave et programmeringsspor, der isoleret fra den øvrige bane giver dig mulighed for at aflæse den aktuelle indstilling af din dekoder, herunder også adresser på Märklin lokomotiver med DIP swits / museklaver, samt forskellige indstiller af de elektroniske dekodere hvor accelaration, bremseforsinkelse samt maksimal hastighed både kan udlæses og ændres. 

 

The ECoS 50210 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio.

The ECoS has - like most of the recent central stations - a large coloured display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the coloured screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured.

ECoS has 9 function keys per integrated cab. The light-, and function keys 1 to 8 show the current state of the function via LEDs.

Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it!

ECoS Features

With an ECoS command station you acquire an open system. As is expected of ESU, from the beginning we wanted to be open to, and compatible with, present systems and norms. Just like our decoders, the ECoS is a real multi-protocol command station.

As a multi-protocol command station, ECoS supports DCC, Märklin® Motorola®, Selectrix® and the M4 data protocol. M4 drives and controls locomotives equipped with mfx® decoders without any restrictions. M4 is completely compatible. You can even continue to use almost all of your present loco decoders. ECoS is therefore the only digital command station worldwide that unifies 4 data protocols.

With an ECoS you can run locos: via two integrated cabs with large, easy-grasp motor driven throttle knobs and nine precise click-function keys you control your locos. In combination with the touch screen, you can control up to 20 functions per engine.

ECoS controls turnouts and magnetic accessories: a large, graphical control panel provides you access for up to 1420 turnouts (DCC or Motorola® protocol).

With ECoS you can plan and control routes: simply put turnouts and magnetic accessories graphically in groups and switch them together. Routes will be activated either by feedback contacts or by key. You can even use s88 occupancy detectors or ECoSDetector feedback modules.

With ECoS you can operate shuttle trains very easily: put a rail contact at both ends of the track and ECoS will do the rest.

The ECoS built-in booster has so much power that, in most cases, you don‘t need additional ones.

ECoS supports EcoSlink, a high-speed bus system, based on CAN, that transmits data instantaneously to the command station.

With ECoS, never before has it been so simple to program your decoders: the large, colored TFT screen offers good contrast and displays a lot of information in unabbreviated text. A programming track establishes contact with your decoders.

Of course, the ECoS has a pre-installed DCC RailCom® function: with its „global detector“ it recognizes RailCom®-compatible decoders (e.g. our LokPilot V4.0 decoder) directly on the main track. You also have the possibility to feedback the turnout position via the SwitchPilot to the ECoS command station.

ECoS is compatible. Besides Selectrix®, Märklin®-Motorola®, and M4, ECoS speaks all variants of the DCC-Norm. With the integrated analog controllers (joysticks) you can even control the whistle of LokSound decoders, never before more precisely.

ECoS is expandable. Each ECoS command station sports a network port for connection with a computer. Thus you can update software or use a computer for operation.